1. First, clean up the decoration waste left on site;
2. Overall dust collection from top to bottom;
3、 Glass cleaning: take down the screen first (some screens are invisible and can't be removed), then wipe the glass frame with a towel, then smear the glass evenly from top to bottom with a water applicator dipped with diluted aqueous glass solution, and remove stubborn stains with a shovel. After repeating the above process, scrape the glass frame from top to bottom with a double-sided glass cleaner, and wipe the residue on the frame with a dry towel Clean the water mark on the glass, and finally install the screen.
4、 Toilet: adhere to the principle of from top to bottom, first recognize the material of the ceiling of the toilet, whether it is PVC or aluminum-plastic plate or paint, and then use different cleaning methods according to different materials; clean the walls of the toilet with a cleaning ball or a brush, focusing on the cracks of ceramic tiles, and the glue marks, paint spots, cement stains left on the surface of ceramic tiles; clean the toilet with a towel Clean all kinds of faucets and pipe fittings with stainless steel cleaning fluid; finally clean the floor, which is the corner of the floor, and use the cleaning ball and blade to remove the dirt and cement stains.
5、 Kitchen: clean the ceiling and walls of the kitchen according to the principle of top-down, use towel to clean the exterior and interior dust of the kitchen cabinet and the exterior of the range hood and cooker; use stainless steel cleaning fluid to clean various taps and pipe fittings; finally clean the floor, which is the corner of the floor, and use cleaning ball and blade to remove the dirt and cement stains And so on.
6. Bedroom and Hall: duster is used to remove dust on the wall, and lyhjuik wipes the inside and outside of furniture and switch box with wet towel.
7. Door and frame: make clear the material of the door, dilute it with professional detergent, and wipe it with towel. The procedure is from top to bottom, fold the towel into a square, and wipe it from left to right from the top of the door. There should be no omission. The place with glue stains can be treated with glue remover. The procedure of frame is the same as that of door. There must be no omission and dead angle.
8. Kicking line: wipe it with towel and remove all kinds of glue marks, paint spots and coatings with blade. Lamps and curtains are excluded